Desiccant dehumidifiers can speed up recovery of structural materials, flooring, books, and anything else damaged by water. In addition, these large dehumidifiers are helpful for surface preparation jobs. This type of equipment is an expensive investment, so renting is an affordable alternative without the hassle of purchasing and setting up the system yourself.
The Quest PowerDry 4800D Pro has been developed in response to the industry’s need for a rugged, efficient, user-friendly desiccant dehumidifier. The PowerDry 4800D Pro is equipped with a circuit breaker, eliminating downtime caused by blown fuses. Weighing just 1600 lbs., and mounted on a narrow 48″ skid, this unit is much easier to transport than many units of similar capacity. Requiring only 106 amps, this 4800 CFM desiccant consumes less energy than competing designs.
Common applications for desiccant dehumidifiers include:
PowerDry 4800D Pro Specifications
- 3032 pints/day AHAM (379 Gallons)
- 4800 CFM process airflow
- Reaches dew points as low as -40°F
- 1550 lbs. (dessicant only), 1675 lbs. (desiccant with frame)
PowerDry 4800D Pro e (electric)
- 480 volt 3-phase
- 106 full load amps
PowerDry 4800D Pro p (propane)
- 240V single phase
- 70 amps
- Propane cylinder and trailer mount available
|Dimensions||Width: 48″ x Height: 56″ x Length: 112″|
|Filters||16″ x 16″ x 2″|
|Water removal AHAM (80°F/60%RH)||379 Gallons/Day|
|Operating Range||-10°F to 140°F|
|Blower||4800 Process CFM|
|Duct Options||18″ to 20″ Flex Duct and Lay Flat|
Not sure if you need a desiccant dehumidifier? Contact Us or call 1-800-810-4181 today.
HEPA Filtration/Negative air machines (also know as air scrubbers) filter and remove airborne particles.